If pressing that button doesnвЂ™t work, take the remote to either a bright light inside your home or even good bright sunlight. There is a button on the side, near the top of the remote to turn it on so you can see the screen. Just like with any screen, the URC MX-780 has a backlight. Though the most common issue is the following one. I know that seems super obvious, but a lot of people forget that. If neither of those work, keep on reading! I CanвЂ™t See My Screen!Д¬heck your batteries. Put some fresh batteries in it, point and try to power it on. If you cannot find the power button, find the original remote the equipment came with from the manufacturer. Next, try bypassing the URC remote by manually powering the equipment on with the power button located on it. Close the cabinets or door like normal and try the URC again. Turn the surge protector off for 5-10 minutes then back on. If you have a cleaning lady this can happen a lot. Always make sure they have not been knocked off or have fallen off. The little eyes stuck on the front of equipment are what control them. Then when you ask what the problem was, it was something you could have done yourself in the same amount of time! Always Check the IR Eyes Nobody wants to pay for a service call just to watch one of our home audio technicians spend less than two minutes fixing the problem. A lot of our service calls for URC issues end up being easy solutions. I will cover the most popular issues, and some easy troubleshooting tips. You do not ever have to press the green power button. We program the remote to turn equipment on when you pick it (pressing CABLE, for example). Never, ever, ever, press the GREEN power button. For our URC MX-780 remotes, that means pressing MAIN, and the red power button in the top right corner. This happens most of the time when customers switch their cable provider or go to a different cable box.ДЄlways start the troubleshooting process by making sure the system is completely powered off. If you have added equipment or replaced old equipment and the remote no longer controls it, we probably have to come reprogram it. Radio frequency allows you to control equipment without seeing it (hidden in a closet or cabinet) infrared uses line of sight (point and shoot). We program the remotes to use both RF and IR at the same time (radio frequency and infrared). So if it has stopped working or is not functioning properly, it is RARELY a programming issue or a problem with the remote itself. They do not lose their programming, even if the batteries die. This may not be the exact remote you have, but a good bit of the troubleshooting will work for older models as well.

The URC MX-780 remote is the go to remote for us and has been for years now. There are several things you need to keep in mind before moving further.

So we figured it is about time to do a short troubleshooting write up. These remotes are not cheap and you have to be a URC certified dealer to program them or add new equipment to the system. Their remotes are solid, reliable, and short of your dog getting a hold of it we rarely have to replace them. It is a product that we believe in and trust.

We have been selling, installing, and programming Universal Remote Control (URC) remotes in our custom home A/V systems for well over 10 years now.

Urc remote bluetooth